Sidebar
Creality Falcon2 40W Laser Engraver & Cutter
A CrealityFalcon Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package is shown with a metal frame and a control box attached by cables. The machine, boasting a 40W laser output, is actively engraving a colorful butterfly design on a flat surface at an impressive 25000mm/min cutting speed. It features a display panel and control buttons on its front edge.
A CrealityFalcon Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package is shown from a slightly elevated angle. The device features a square frame with a 40W laser output module mounted on a movable arm. Control buttons, including a red emergency stop button, are on the front panel. Capable of 25000mm/min cutting speed, the engraver connects to a power source.
Creality Falcon2 40W Laser Engraver & Cutter
Image of a Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package by CrealityFalcon frame without the printing head or bed. The frame is rectangular and metallic with a black rail on the left side. Wires and cables are connected to various points. A power switch and control box are located on the lower right corner, resembling a laser engraving machine setup.
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Falcon2 40W Laser Engraver and Cutter
Creality Falcon2 40W Laser Engraver & Cutter
A CrealityFalcon Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package is shown with a metal frame and a control box attached by cables. The machine, boasting a 40W laser output, is actively engraving a colorful butterfly design on a flat surface at an impressive 25000mm/min cutting speed. It features a display panel and control buttons on its front edge.
A CrealityFalcon Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package is shown from a slightly elevated angle. The device features a square frame with a 40W laser output module mounted on a movable arm. Control buttons, including a red emergency stop button, are on the front panel. Capable of 25000mm/min cutting speed, the engraver connects to a power source.
Creality Falcon2 40W Laser Engraver & Cutter
Image of a Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package by CrealityFalcon frame without the printing head or bed. The frame is rectangular and metallic with a black rail on the left side. Wires and cables are connected to various points. A power switch and control box are located on the lower right corner, resembling a laser engraving machine setup.
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Falcon2 40W Laser Engraver and Cutter
Falcon2 40W Laser Engraver and Cutter

Falcon2 40W Laser Engraver and Cutter

1. High Cutting Power: 40W laser cuts 20mm cork and 0.15mm stainless steel in one pass.
2. Fast Operation: Cutting speed up to 25000 mm/min.
3. Versatile Engraving: Works on mirror stainless steel, ceramics, and opaque glass.
4. Sturdy Build: Durable anodized aluminum alloy structure for stability.
5. Offline & Software-Friendly: Supports TF card use and works with LightBurn and LaserGRBL.

Estimated Delivery Date: Feb. 10th.

Vendor: Creality Falcon
Product Type: Falcon2 Engraver
$3,085.00
$4,037.00
$3,085.00
Save $952.00
Package: Falcon2 40W Protection Kits
Subtotal: $3,085.00

Extra 5% Discount Code for New Subscribers!
Falcon2 40W Laser Engraver and Cutter

Creality Falcon

Falcon2 40W Laser Engraver and Cutter

$4,037.00 $3,085.00
Falcon2 40W Laser Engraver and Cutter
Creality Falcon2 40W Laser Engraver & Cutter
A CrealityFalcon Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package is shown with a metal frame and a control box attached by cables. The machine, boasting a 40W laser output, is actively engraving a colorful butterfly design on a flat surface at an impressive 25000mm/min cutting speed. It features a display panel and control buttons on its front edge.
A CrealityFalcon Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package is shown from a slightly elevated angle. The device features a square frame with a 40W laser output module mounted on a movable arm. Control buttons, including a red emergency stop button, are on the front panel. Capable of 25000mm/min cutting speed, the engraver connects to a power source.
Creality Falcon2 40W Laser Engraver & Cutter
Image of a Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package by CrealityFalcon frame without the printing head or bed. The frame is rectangular and metallic with a black rail on the left side. Wires and cables are connected to various points. A power switch and control box are located on the lower right corner, resembling a laser engraving machine setup.
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Creality Falcon2 40W Laser Engraver & Cutter
Falcon2 40W Laser Engraver and Cutter
Falcon2 40W Laser Engraver and Cutter

Creality Falcon

Falcon2 40W Laser Engraver and Cutter

$4,037.00 $3,085.00
Package: Falcon2 40W Protection Kits

Meet the super power of Creality Falcon2 40W together

Add Some Colors to Your Works, and Your Life

When the stainless steel is heated by the super powerful laser beam, the metal surface will physically react and produce hundreds of colors, bringing your works to life.

Adjustable Light Beam

One head for two uses. No need to replace. Convenient and fast Creality Falcon2 40W

Our precise cutting edge is designed to make your cuts more effective.

Stay away from burnt black and rough

The amount of air can be adjusted automatically with the LightBurn setting.

Special five safety protection features will protect your operation safety

Active Stop Function

The machine will stop working in case of accidental tilt, flip or drop, with the buzzer and indicator sending an alert.

Triple real-time monitoring, escorting your work

Small gadgets to help you complete efficient focusing in 3 seconds

1. Place the multi-level fixed-focus block between the module and the processed material

2. Lower down the laser module to touch the corresponding position of the multi-stage focus bar

3. Use the right screw to lock it.

Offline Dynamic Preview

Position and adjust precisely without connecting to a computer.

Extensive Compatibility

Compatible with a variety of systems, including Windows and macOS systems, and software such as LaserGRBL and LightBurn.

Support Offline Creating

Just insert a TF card, and you can feel free to create anytime, anywhere.

Outstanding Motion Stability

The full aluminum alloy structure design brings a more solid machine, ensuring exceptional stability even in high-speed operation.

Work Display

Customer Reviews

Based on 8 reviews
100%
(8)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
James Ramos
Couldnt be happier

Great machine, even better customer service..

A
Aiden Tj
really good wire management

what a great job they've done with cable management and the air hose. I like how well the laser light is blocked by the frame and head. it's definitely 4 times powerful then my homemade ten Watt beside it. it'll go much faster then in the video, that was one of my first projects with my falcon 40 Watt. I have no complaints, I do wish the head would go faster when using the built in buttons, and that's probably possible to change with a g code, I haven't dug into that yet. quite happy so far. if they'd put wireless in it, it would be unreal. I use a virtual here server on a raspberry pi, which works for most things. the fire sense works well too lol. like every new toy you have to see what it can do, like cut 5/8 plywood, too much air and it will light on fire and quite well, but the alarm went off and it moved the head out of the way and it probably would of gone out in it's own. caused by me the user, but still friggin cool feature. just need to build a light burn camera holder for it now.

User picture
M
Minna-Fiji-Island
thes best

help's me a lot with my project's work's beutiful

B
BeyondFree
Good workmanship

This laser engraver module is like having a skilled artisan on standby, ready to transform your ideas into finely etched realities.

But i cant really give a detailed review as i received just a part. Even though its a crucial part but i have no money to buy the rest to provide a detailed review.

J
J. Y.
Very Good Beginner Laser

This was my second laser and I upped the wattage to try and get through cuts done in one pass.
It is still a little bit on the weak side depending on the material and the thickness.
MAKE SURE you use this in a very well vented area, you do not want to be breathing in while this is cutting!
Also, do not leave this unattended. You never know what the laser could bounce off of.
Make sure to do some research before using it. Follow the safety instructions plus some.
If you are looking to do some engraving and burning, this is a great tool to do so!

User picture
12
Document
Join Our Facebook Group
Join the active Creality Falcon Facebook community, a vibrant hub for sharing ideas, discovering the latest updates, and engaging with real users.
Join Now
Explore genuine user reviews
Dive into authentic reviews and videos to learn more about our machines before you place your order.
avatar
Donovan Jacobs
quotation-mark Greetings, greetings all. Love my 10w falcon. This thing exceeded my expectations like crazy. Works like a charm and so easy to build. quotation-mark
avatar
Daniel Hughes
quotation-mark Did a little something for myself for a change. Engraved my stainless steel ciggy case. Surprised how crisp it came out! quotation-mark
avatar
Alby Martin
quotation-mark 100 Wedding Gifts, with a falcon 5W (I had to make 3 layers of 0.4mm wood). I cut the adhesive paper itself with my own laser. Besides, I made a custom keychain design for the friends of the couple that formed the figure of the meplee. quotation-mark