ENDS IN:
00 Days
:
00 Hours
:
00 Minutes
:
00 Seconds
Free Gifts
On Sale
Super Recommended
Bundle Discount
Halloween Offers
Magic Ideas
Free Gifts
On Sale
Super Recommended
Bundle Discount
Halloween Offers
Magic Ideas
Free Gifts
🎁 Spend the following amounts and enjoy automatic gifts added to your cart from October 16th to November 2nd Only.
Complete Crafting Bundle
Free $73.00
Spend over $599.00
Halloween Paper Gift Set
Free $137.00
Spend over $899.00
Super Magic Engraving Package
Free $210.00
Spend over $1,399.00
On Sale
Falcon2 Series
|Falcon2 Pro Series
|CR-Laser Falcon Series
Engraving machine up to 50% off! Accessory kits up to 20% off, Halloween craft package 15% off, and extra savings on other craft materials: 10% off 1, 15% off 2, 20% off 3!
38% Off
Best Buy
Bundle Falcon2 40W Laser Engraver and Cutter Extension Kits
$1,958.00$3,142.00
(102)
9% Off
Best Buy
Falcon2 40W Laser Engraver and Cutter Ultimate Engraving Package
$2,458.00$2,707.99
(58)
18% Off
Best Buy
Falcon2 40W Laser Engraver and Cutter All-in-One Kits
$2,759.00$3,357.00
(99)
Best-Seller Falcon2 22W and 40W Engraver and Cutter
50% Off
Hot Sale
Bundle Falcon2 22W Laser Engraver and Cutter Protection Kits
$1,080.00$2,157.00
(200)
50% Off
Hot Sale
Falcon2 22W Laser Engraver and Cutter Ultimate Engraving Package
$1,094.00$2,177.00
(156)
29% Off
Hot Sale
Bundle Falcon2 22W Laser Engraver and Cutter Extension Kits
$1,690.00$2,371.00
(145)
buy more, save more
Best Buy
Falcon2 Pro 40W and 22W Enclosed Laser Engraver and Cutter
$2,143.00$2,143.00
(102)
24% Off
Best Buy
Falcon2 Pro 40W Enclosed Laser Engraver and Cutter Basic Kits
$2,552.00$3,371.99
(58)
5% Off
Best Buy
Falcon2 Pro 40W Enclosed Laser Engraver and Cutter Master Engraving Bundle
$3,534.00$3,705.99
(99)
Super High-Speed Engraving Falcon 22W/40W Engravers
buy more, save more
Hot Sale
Falcon2 Pro 22W Glass Cup Design Kits
$1,946.00
(200)
buy more, save more
Hot Sale
Falcon2 Pro 22W Enclosed Laser Engraver and Cutter Bundle - Basic Kits for Wood Engraving
$1,876.00
(156)
buy more, save more
Hot Sale
Falcon2 Pro 22W Enclosed Laser Engraver and Cutter Bundle - for Multiple Project Engraving
$2,609.00
(145)
buy more, save more
Best Buy
CR-Laser Falcon 5W Engraver
$437.00$415.00
(102)
40% Off
Best Buy
CR-Laser Falcon 10W Laser Engraver
$440.00$734.00
(58)
buy more, save more
Best Buy
CR-Laser Falcon 10W Engraver Complete Crafting Engraver Set
$594.00$594.00
(99)
Cost-Effective Laser Engraving
buy more, save more
Hot Sale
Bundle CR-Laser Falcon 10W Laser Engraver Basic Kits
$545.00$545.00
(200)
buy more, save more
Hot Sale
Bundle CR-Laser Falcon 10W Laser Engraver All-in-one Kits
$866.00$866.00
(156)
Super High-Speed Engraving
Falcon2 Pro 40W and 22W Enclosed Laser Engraver and Cutter
30 Day Price Guarantee -Ordernow and shop with peace of mind!
22W / Falcon2 Pro
- 22W / Falcon2 Pro
- 22W / Falcon2 Pro Basic Kits
- 22W / Falcon2 Pro Glass Cup Design Kits
- 22W / Falcon2 Pro Extension Kits
- 40W+1.6W(Free Gift) / Falcon2 Pro
- 40W+1.6W(Free Gift) / Falcon2 Pro Basic Kits
- 40W+1.6W(Free Gift) / Falcon2 Pro Glass Cup Design Kits
- 40W+1.6W(Free Gift) / Falcon2 Pro Extension Kits
- 40W+1.6W(Free Gift) / Falcon2 Pro All-In-One Kits
- 60W+1.6W(Free Gift) / Falcon2 Pro
Bundle Discount
Crafting Materials
|Falcon Accessories
Crafting Materials Buy 2 Get 10% Off, Buy 3 Get 15% Off!
buy more, save more
Best Buy
Three Colors Transparent Acrylic Sheets 12*12*1/8'' - Pack of 10pcs
$94.99$94.99
(66)
buy more, save more
Best Buy
Rubberwood Spliced Plywood 1/8" x 11.8" x 11.8" for Laser Engraving and Cutting - 6pcs
$40.72$40.72
(57)
buy more, save more
Best Buy
Portable 8ml Atomizer Perfume Spray Bottle for Laser Engraving - Pack of 10pcs
$61.76$61.76
(99)
buy more, save more
Best Buy
Men's Birthday Gift Set: Beer Opener, Coaster, Wood Mug, Keychain, Socks for Laser Engraving
$80.65$80.65
(134)
buy more, save more
Best Buy
2 pcs Adjustable Mesh Trucker Hat with 4pcs Cap Stickers + 3pcs Wood Sheets for Engraving
$75.00$75.00
(90)
buy more, save more
Best Buy
Laser Material Kit: 11 Types Stainless Steel and Pine Wood for CNC Laser Engraving and Cutting
$65.19$65.19
()
buy more, save more
Best Buy
Complete Crafting Bundle: Leather Coasters, Perfume Spray Bottles, Acrylic & Basswood Sheets
$172.45$172.45
()
buy more, save more
Best Buy
Scratch Paper A4 for Laser Engraving - Pack of 5 Colors and 50 Sheets
$30.01$30.01
()
buy more, save more
Best Buy
Gold Silver Scratch Paper for Laser Engraving A4 - Pack of 40pcs
$36.83$36.83
()
buy more, save more
Best Buy
Custom Leather Passport Holder and Luggage Tag Set for Laser Engraving
$44.60$44.60
()
buy more, save more
Best Buy
Basswood Plywood Sheets 11.8" x 11.8" for Laser Engraving - Pack of 10pcs, 6pcs and 3pcs
$39.99$39.99
()
buy more, save more
Best Buy
Opaque Glossy Colorful Acrylic Sheets - Pack of 10pcs
$45.99$45.99
()
buy more, save more
Best Buy
Purple Opaque Acrylic Sheets 12"x12"x1/8" for Laser Cutting - 3pcs
$41.17$41.17
()
buy more, save more
Best Buy
Gold and Silver Self-Adhesive Glitter Cardstock Paper A4 for Laser Engraving - 40 Sheets
$23.85$23.85
()
buy more, save more
Best Buy
Personalized Brown Leather Coasters and Holder 4" for Laser Engraving - 6pcs
$32.59$32.59
()
buy more, save more
Best Buy
Leather Repair Patch Self 10x12" for Laser Engraving and Cutting - Pack of 4pcs-Black
$32.59$32.59
()
buy more, save more
Best Buy
HTV Heat Transfer Vinyl Paper for Laser Engraving - Pack of 10pcs
$49.75$49.75
()
buy more, save more
Best Buy
Laser Carved Colored Paper for Laser Engraving - Pack of 10pcs
$55.75$55.75
()
buy more, save more
Best Buy
Stainless Steel Name Tags for Laser Engraving - Pack of 4 Colors and 20 Packs
$50.62$50.62
()
buy more, save more
Best Buy
Titanium Steel Pet Tags and Metal Charms for Laser Engraving - 20pcs
$33.48$33.48
()
buy more, save more
Best Buy
Basswood Plywood Sheets A4 1/8" x 8.27" x 11.69" for Laser Engraving and Cutting - Pack of 6pcs
$40.31$40.31
()
buy more, save more
Best Buy
Mahogany Plywood 1/8" x 11.8" x 11.8" for Laser Engraving and Cutting - Pack of 6pcs
$38.78$38.78
()
buy more, save more
Best Buy
Plywood Sheets 11.8*11.8*1/8” A4 for Laser Engraving and Cutting - Pack of 10pcs
$52.32$52.32
()
buy more, save more
Best Buy
Thickness Basswood Plywood 8.27x11.7x0.12" for Laser Engraving - Pack of 10pcs
$43.17$43.17
()
buy more, save more
Best Buy
Bubinga Brazilian Rosewood Plywood Sheets 11.8" x 11.8" for Laser Engraving and Cutting - 6pcs
$43.72$43.72
()
buy more, save more
Best Buy
Brown Wood 12"x12" for Laser Engraving and CNC Cutting - 6pcs
$21.99$21.99
()
buy more, save more
Best Buy
Beer Bottle DIY Gift Set For CR-Laser Falcon 5W 7.5W 10W Engraver
$322.98$322.98
()
buy more, save more
Best Buy
Beer Bottle DIY Gift Set For 22W 40W 60W 12W Laser Cutter and Engraver
$324.99$324.99
()
Crafting Materials Buy 2 Get 10% Off, Buy 3 Get 15% Off!
buy more, save more
Best Buy
Protection Enclosure Pro for Falcon Laser Engravers
$160.00$160.00
(66)
buy more, save more
Best Buy
Falcon Rotary Kit Pro with Risers(4Packs), Carved Colored Paper Bundle - for Glass Cup Engraving
$311.00$311.00
(57)
buy more, save more
Best Buy
Honeycomb Workbench for Laser Engraver 500mm * 500mm
$199.00$199.00
(99)
buy more, save more
Best Buy
Beer Bottle DIY Gift Set For CR-Laser Falcon 5W 7.5W 10W Engraver
$322.98$322.98
(134)
buy more, save more
Best Buy
Bundle Falcon Rotary Kit Pro with Risers(4Packs) for Curved Surface Laser Engraving
$334.00$334.00
(90)
buy more, save more
Best Buy
Bundle Falcon Rotary Roller with Adjustable Risers for Laser Engraving Machines
$254.00$254.00
()
buy more, save more
Best Buy
Beer Bottle DIY Gift Set For 22W 40W 60W 12W Laser Cutter and Engraver
$324.99$324.99
()
buy more, save more
Best Buy
Cutter Accessory Kit for Falcon 10W, 7.5W, 5W Laser Engraver
$88.50$88.50
()
buy more, save more
Best Buy
Air Assist for 10W and 7.5W CR-Laser Falcon Engraver
$120.00$120.00
()
buy more, save more
Best Buy
Rotary Kit Pro for Curved Surface Engraving
$299.00$299.00
()
buy more, save more
Best Buy
Rotary Roller for Laser Engraving Machine
$219.99$219.99
()
buy more, save more
Best Buy
Protective Cover for Laser Engravers
$150.00$150.00
()
buy more, save more
Best Buy
Laser Safety Glasses_180-534nm for Falcon Engraver and Cutter
$79.99$79.99
()
buy more, save more
Best Buy
Risers for 12W, 22W, 40W, 60W Laser Engraver and Cutter - Pack of 4pcs
$35.00$35.00
()
buy more, save more
Best Buy
Risers for 10W and 5W Falcon Laser Engraver
$32.99$32.99
()
buy more, save more
Best Buy
Falcon2 Replace Protective Lens
$119.99$119.99
()
buy more, save more
Best Buy
Laser Module for High Wattage Laser Engravers - 40W
$1,999.00$1,999.00
()
Halloween Offers
Free Gifts Auto-add
Extra 5% Off for New Subscribers
Save-Up to 50% Off
Free Spooky Craft Files
Affiliate Program
Magic Ideas
Setting
Get recommended parameters for setting, including power, speed, and process
Falcon2 Pro 40W / Falcon2 40W
Falcon2 Pro 22W / Falcon2 22W
Falcon2 12W
CR-Laser Falcon 10W
CR-Laser Falcon 5W
Falcon Laser Module 1.6W
Engraving
Cutting
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 25 | 6000 | 1 |
| Walnut Plywood | 3 | 20 | 6000 | 1 |
| Rosewood Plywood | 3 | 20 | 6000 | 1 |
| Bamboo | 3 | 25 | 6000 | 1 |
| Kraft Paper | 0.15 | 12 | 6000 | 1 |
| Red Card Paper | 0.2 | 8 | 6000 | 1 |
| Red Felt | 0.8 | 7 | 6000 | 1 |
| Brown Leather | 0.65 | 12 | 6000 | 1 |
| Black Opaque Glossy Acrylic | 3 | 26 | 4000 | 1 |
| Purple Opaque Glossy Acrylic | 3 | 26 | 6000 | 1 |
| Red Opaque Glossy Acrylic | 3 | 26 | 6000 | 1 |
| Orange Opaque Glossy Acrylic | 3 | 26 | 6000 | 1 |
| Green Opaque Glossy Acrylic | 3 | 26 | 6000 | 1 |
| Red Transparent Acrylic | 3 | 12 | 3000 | 1 |
| Yellow Transparent Acrylic | 3 | 12 | 3000 | 1 |
| Green Transparent Acrylic | 3 | 12 | 3000 | 1 |
| Black Frosted Acrylic | 3 | 22 | 3000 | 1 |
| Orange Frosted Acrylic | 3 | 30 | 1200 | 1 |
| Green Frosted Acrylic | 3 | 30 | 1200 | 1 |
| Purple Frosted Acrylic | 3 | 30 | 1000 | 1 |
| Anodized Aluminum | 3 | 30 | 6000 | 1 |
| Brushed Stainless Steel | 2 | 40 | 6000 | 1 |
| White Tile Painted Black | 6 | 28 | 4000 | 1 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material. 3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser)." |
|||
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 100 | 1000 | 1 |
| 3 | 100 | 850 | 1 | |
| 5 | 100 | 700 | 1 | |
| 8 | 100 | 400 | 1 | |
| 10 | 100 | 300 | 1 | |
| 15 | 100 | 150 | 1 | |
| Walnut Plywood | 3 | 100 | 750 | 1 |
| 5 | 100 | 600 | 1 | |
| Rosewood Plywood | 3 | 100 | 750 | 1 |
| 5 | 100 | 600 | 1 | |
| Bamboo | 5 | 100 | 800 | 1 |
| Kraft Paper | 0.2 | 40 | 4000 | 1 |
| Red Card Paper | 0.2 | 30 | 4000 | 1 |
| Red Felt | 0.8 | 35 | 4000 | 1 |
| Brown Leather | 0.65 | 70 | 4000 | 1 |
| Black Acrylic | 4.6 | 100 | 180 | 1 |
| 7.6 | 100 | 120 | 2 | |
| Purple Opaque Glossy Acrylic | 3 | 30 | 120 | 2 |
| Red Opaque Glossy Acrylic | 3 | 30 | 120 | 1 |
| Orange Opaque Glossy Acrylic | 3 | 30 | 120 | 2 |
| Green Opaque Glossy Acrylic | 3 | 30 | 120 | 3 |
| Red Transparent Acrylic | 3 | 30 | 120 | 3 |
| Yellow Transparent Acrylic | 3 | 30 | 120 | 2 |
| Green Transparent Acrylic | 3 | 30 | 120 | 3 |
| Black Frosted Acrylic | 3 | 30 | 180 | 1 |
| Orange Frosted Acrylic | 3 | 30 | 130 | 3 |
| Green Frosted Acrylic | 3 | 30 | 120 | 3 |
| Purple Frosted Acrylic | 3 | 30 | 120 | 3 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material. 3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser)." |
|||
Engraving
Cutting
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 40 | 6000 | 1 |
| Walnut Plywood | 3 | 35 | 6000 | 1 |
| Rosewood Plywood | 3 | 35 | 6000 | 1 |
| Bamboo | 3 | 40 | 6000 | 1 |
| Kraft Paper | 0.15 | 18 | 6000 | 1 |
| Red Card Paper | 0.2 | 15 | 6000 | 1 |
| Red Felt | 0.8 | 13 | 6000 | 1 |
| Brown Leather | 0.65 | 18 | 6000 | 1 |
| Black Opaque Glossy Acrylic | 3 | 50 | 4000 | 1 |
| Purple Opaque Glossy Acrylic | 3 | 50 | 6000 | 1 |
| Red Opaque Glossy Acrylic | 3 | 50 | 6000 | 1 |
| Orange Opaque Glossy Acrylic | 3 | 50 | 6000 | 1 |
| Green Opaque Glossy Acrylic | 3 | 50 | 6000 | 1 |
| Red Transparent Acrylic | 3 | 20 | 3000 | 1 |
| Yellow Transparent Acrylic | 3 | 20 | 3000 | 1 |
| Green Transparent Acrylic | 3 | 20 | 3000 | 1 |
| Black Frosted Acrylic | 3 | 40 | 3000 | 1 |
| Orange Frosted Acrylic | 3 | 60 | 1200 | 1 |
| Green Frosted Acrylic | 3 | 60 | 1200 | 1 |
| Purple Frosted Acrylic | 3 | 60 | 1000 | 1 |
| Anodized Aluminum | 3 | 60 | 6000 | 1 |
| Brushed Stainless Steel | 2 | 80 | 6000 | 1 |
| White Tile Painted Black | 6 | 50 | 4000 | 1 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material. 3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser)." |
|||
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 100 | 700 | 1 |
| 3 | 100 | 550 | 1 | |
| 5 | 100 | 400 | 1 | |
| 8 | 100 | 240 | 1 | |
| 10 | 100 | 120 | 1 | |
| Walnut Plywood | 3 | 100 | 450 | 1 |
| 5 | 100 | 350 | 1 | |
| Rosewood Plywood | 3 | 100 | 450 | 1 |
| 5 | 100 | 350 | 1 | |
| Bamboo | 3 | 100 | 450 | 1 |
| Kraft Paper | 0.2 | 80 | 4000 | 1 |
| Red Card Paper | 0.2 | 50 | 4000 | 1 |
| Red Felt | 0.8 | 55 | 4000 | 1 |
| Brown Leather | 0.65 | 100 | 2000 | 1 |
| Black Acrylic | 4.6 | 100 | 120 | 1 |
| 7.6 | 100 | 120 | 2 | |
| Purple Opaque Glossy Acrylic | 3 | 55 | 120 | 2 |
| Red Opaque Glossy Acrylic | 3 | 55 | 120 | 1 |
| Orange Opaque Glossy Acrylic | 3 | 55 | 120 | 2 |
| Green Opaque Glossy Acrylic | 3 | 55 | 120 | 3 |
| Red Transparent Acrylic | 3 | 55 | 120 | 3 |
| Yellow Transparent Acrylic | 3 | 55 | 120 | 2 |
| Green Transparent Acrylic | 3 | 55 | 120 | 3 |
| Black Frosted Acrylic | 3 | 55 | 180 | 1 |
| Orange Frosted Acrylic | 3 | 55 | 120 | 3 |
| Green Frosted Acrylic | 3 | 55 | 120 | 3 |
| Purple Frosted Acrylic | 3 | 55 | 120 | 3 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect.In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material. 3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser)." |
|||
Engraving
Cutting
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 40 | 4000 | 1 |
| Walnut Plywood | 3 | 35 | 4000 | 1 |
| Rosewood Plywood | 3 | 35 | 4000 | 1 |
| Bamboo | 3 | 40 | 4000 | 1 |
| Kraft Paper | 0.15 | 15 | 4000 | 1 |
| Red Card Paper | 0.2 | 15 | 4000 | 1 |
| Red Felt | 0.8 | 15 | 4000 | 1 |
| Brown Leather | 0.65 | 20 | 4000 | 1 |
| Black Opaque Glossy Acrylic | 3 | 80 | 4000 | 1 |
| Purple Opaque Glossy Acrylic | 3 | 50 | 4000 | 1 |
| Red Opaque Glossy Acrylic | 3 | 50 | 4000 | 1 |
| Orange Opaque Glossy Acrylic | 3 | 50 | 4000 | 1 |
| Green Opaque Glossy Acrylic | 3 | 50 | 4000 | 1 |
| Red Transparent Acrylic | 3 | 40 | 3000 | 1 |
| Yellow Transparent Acrylic | 3 | 40 | 3000 | 1 |
| Green Transparent Acrylic | 3 | 40 | 3000 | 1 |
| Black Frosted Acrylic | 3 | 80 | 3000 | 1 |
| Orange Frosted Acrylic | 3 | 90 | 1200 | 1 |
| Green Frosted Acrylic | 3 | 90 | 1200 | 1 |
| Purple Frosted Acrylic | 3 | 90 | 1000 | 1 |
| Anodized Aluminum | 3 | 100 | 250 | 1 |
| Brushed Stainless Steel | 2 | 100 | 800 | 1 |
| White Tile Painted Black | 6 | 85 | 4000 | 1 |
| Notes |
"1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material. 3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser)." |
|||
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 100 | 400 | 1 |
| 3 | 100 | 300 | 1 | |
| 5 | 100 | 200 | 1 | |
| 8 | 100 | 250 | 2 | |
| 10 | 100 | 180 | 3 | |
| Walnut Plywood | 3 | 100 | 280 | 1 |
| 5 | 100 | 150 | 1 | |
| Rosewood Plywood | 3 | 100 | 280 | 1 |
| 5 | 100 | 150 | 1 | |
| Bamboo | 3 | 100 | 280 | 1 |
| Kraft Paper | 0.2 | 100 | 4000 | 1 |
| Red Card Paper | 0.2 | 100 | 4000 | 1 |
| Red Felt | 0.8 | 100 | 3800 | 1 |
| Brown Leather | 0.65 | 100 | 2000 | 1 |
| Black Acrylic | 4.6 | 100 | 300 | 2 |
| 7.6 | 100 | 250 | 3 | |
| Purple Opaque Glossy Acrylic | 3 | 95 | 120 | 2 |
| Red Opaque Glossy Acrylic | 3 | 95 | 120 | 1 |
| Orange Opaque Glossy Acrylic | 3 | 95 | 120 | 2 |
| Green Opaque Glossy Acrylic | 3 | 95 | 120 | 3 |
| Red Transparent Acrylic | 3 | 95 | 120 | 3 |
| Yellow Transparent Acrylic | 3 | 95 | 120 | 2 |
| Green Transparent Acrylic | 3 | 95 | 120 | 3 |
| Black Frosted Acrylic | 3 | 95 | 200 | 1 |
| Orange Frosted Acrylic | 3 | 95 | 120 | 3 |
| Green Frosted Acrylic | 3 | 95 | 120 | 3 |
| Purple Frosted Acrylic | 3 | 95 | 120 | 3 |
| Notes |
"1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. In addition, engraving on brushed stainless steel can achieve colorful effects by setting different parameters, but the oxidation degree of different materials is different, and slight differences in focal length and power will also affect the actual effect.It is recommended to do some tests on your material. 3.The bottom surface of the cutting place should be suspended(use a honeycomb worktable) when cutting.You should protect the workbench (such as using aluminum plates or other materials that are not easily penetrated by laser)." |
|||
Engraving
Cutting
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 40 | 3000 | 1 |
| Bamboo | 5 | 40 | 3000 | 1 |
| Kraft paper | 0.2 | 25 | 3000 | 1 |
| Red card paper | 0.2 | 25 | 3000 | 1 |
| Red felt | 0.8 | 15 | 3000 | 1 |
| Brown leather | 0.65 | 20 | 3000 | 1 |
| Black acrylic | 4.5 | 50 | 3500 | 1 |
| Anodized aluminum | 3 | 100 | 200 | 1 |
| Stainless steel | 2 | 100 | 500 | 1 |
| White tile painted black | 6 | 95 | 3800 | 1 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. 3.The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser). |
|||
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 100 | 350 | 1 |
| 4 | 100 | 200 | 1 | |
| 5 | 100 | 150 | 1 | |
| 8 | 100 | 230 | 3 | |
| Bamboo | 5 | 100 | 230 | 3 |
| Black acrylic | 4.5 | 100 | 120 | 2 |
| Kraft paper | 0.2 | 100 | 3500 | 1 |
| Red card paper | 0.2 | 100 | 3500 | 1 |
| Red felt | 0.8 | 100 | 3500 | 1 |
| Brown leather | 0.65 | 100 | 1500 | 1 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. 3.The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser). |
|||
Engraving
Cutting
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 75 | 3000 | 1 |
| Bamboo | 5 | 75 | 3000 | 1 |
| Kraft paper | 0.2 | 28 | 3000 | 1 |
| Red card paper | 0.2 | 28 | 3000 | 1 |
| Red felt | 0.8 | 20 | 3000 | 1 |
| Brown leather | 0.65 | 30 | 3000 | 1 |
| Black acrylic | 4.5 | 95 | 3500 | 1 |
| Anodized aluminum | 3 | 100 | 100 | 1 |
| White tile painted black | 6 | 95 | 2000 | 1 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. 3.The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser). |
|||
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Basswood | 2 | 100 | 250 | 1 |
| 4 | 100 | 220 | 3 | |
| 5 | 100 | 220 | 4 | |
| Bamboo | 5 | 100 | 220 | 4 |
| Black acrylic | 4.5 | 100 | 120 | 4 |
| Kraft paper | 0.2 | 100 | 2000 | 1 |
| Red card paper | 0.2 | 100 | 2000 | 1 |
| Red felt | 0.8 | 100 | 1800 | 1 |
| Brown leather | 0.65 | 100 | 800 | 1 |
| Notes |
1.Please ensure that the focal length of the laser
module is correct and the lens of the laser module is
clean when powered off(It can be clean with the dustless
cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. 3.The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser). |
|||
Engraving
Cutting
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Linden plywood | 2 | 81 | 1500 | 1 |
| Kraft paper | 0.2 | 2600 | 1 | |
| Red card paper | 0.2 | 4300 | 1 | |
| Orange card paper | 2300 | 1 | ||
| Yellow card paper | 2300 | 1 | ||
| Green card paper | 2300 | 1 | ||
| Cyan card paper | 1200 | 1 | ||
| Blue card paper | 1200 | 1 | ||
| Purple card paper | 3900 | 1 | ||
| Red asphalt felt | 0.8 | Engraving is not recommended but cutting is recommended (such as window grilles). | ||
| Orange asphalt felt | ||||
| Yellow asphalt felt | ||||
| Green asphalt felt | ||||
| Cyan asphalt felt | ||||
| Blue asphalt felt | ||||
| Purple asphalt felt | ||||
| Notes |
1.Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. 3.The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser)." |
|||
| Material | Thickness(mm) | Recommended Power（%） | Recommended Work Speed(mm/min) | Passes |
|---|---|---|---|---|
| Kraft paper | 0.2 | 81 | 200 | 1 |
| Red card paper | 0.2 | 200 | 1 | |
| Orange card paper | 1 | |||
| Yellow card paper | 1 | |||
| Green card paper | 1 | |||
| Cyan card paper | 1 | |||
| Blue card paper | 1 | |||
| Purple card paper | 1 | |||
| Red asphalt felt | 0.8 | 400 | 1 | |
| Orange asphalt felt | 1 | |||
| Yellow asphalt felt | 1 | |||
| Green asphalt felt | 1 | |||
| Purple asphalt felt | 1 | |||
| Cyan asphalt felt | 200 | 1 | ||
| Blue asphalt felt | 150 | 1 | ||
| Notes |
1.Please ensure that the focal length of the laser module is correct and the lens of the laser module is clean when powered off(It can be clean with the dustless cloth and alcohol).
2.The parameters are for reference only because the color of the material is different and it will lead to a different effect.You can achieve a desired effect by adjusting the parameters: Generally higher power or slower speed make deeper effect; Lower power or faster speed make shallower effect. 3.The bottom surface of the cutting place should be suspended when cutting.You should protect the workbench (such as using steel plates or other materials that are not easily penetrated by laser)." |
|||
Free shipping Over $69.99
Fast shipping with local delivery
14-Day Money-Back Guarantee
Support a return within 14 natural days
12-Month Warranty Offer
Up to 1-year warranty
Payment Flexibility
10 secure payment methods& install- ment payments.
24/7 Expert Service
E-mail us at: au.support @crealityfalcon.com
Event FAQs
Q1: How Can l get all the free gifts during this event?
If your order meets the requirements of our promotion, the free gifts will be automatically added to your shopping cart until you reach thecheckout page. If you dont see it, please contact our customer service for assistance. Please email: au.support@crealtyfaicon.com.
Q2：What payment methods do you accept?
We accept a variety of payment methods including credit cards, shop pay, PayPal and more. You can choose the payment method that works best for you at checkout.
Q3：How long does shipment normally take?
Due to high order volume, we typically ship packages within 48 hours.
Q4：Can I engrave on reflective/transparent materials such as ceramic/glass?
Yes, but you need to coat the surface of the material with anti-reflective material before engraving to ensure the engraving effect and prevent the reflected light from damaging the laser module.
Q5：How to Download Halloween Creative Files?
1. Check Your Internet Connection: Ensure your device is connected to the internet and that the connection is stable. 2. Refresh the Page: Sometimes the page doesn't load completely; try refreshing the webpage. 3. Contact Support: If none of the above solutions work, please reach out to our customer support team at support@crealityfalcon.com, and we will be happy to assist you.
- Choosing a selection results in a full page refresh.